Lawrence Livermore National Laboratory (LLNL) researchers, along with a team from UC Santa Cruz (UCSC), have devised a method for doubling the performance of 3-D-printed graphene-based supercapacitors.
The method, which involves sandwiching lithium ion and perchlorate ion between layers of graphene in aerogel electrodes, substantially improved the capacity of the electrodes while still maintaining the devices’ excellent rate capability, the researchers discovered. Their findings were published online(link is external)and are featured as the back cover for the June edition of the journalChemNanoMat(link is external).
“This is a unique method that significantly raises the performance of our previous graphene aerogel supercapacitors,” said LLNL engineer and paper co-author Cheng Zhu. “We’ve modified the devices and found the best recipe.”
LLNL researchers provided the UCSC team with the 3-D-printed graphene aerogel electrodes built using a direct ink writing process. Graphene-based materials are increasingly being used in supercapacitors because of their ultra-large surface area and excellent conductivity.
The method involves two ion-intercalation steps (lithium-ion intercalation and perchlorate-ion intercalation), followed by hydrolysis of perchlorate ion intercalation compounds.
“This two-step electrochemical process increases the surface area of graphene-based materials for charge storage, as well as the number of pseudo-capacitive sites that contribute additional storage capacity,” said LLNL material scientist and paper co-author Fang Qian.
Capacitance of graphene aerogel is limited by its relatively small ion-accessible surface area as a result of aggregation and stacking of graphene sheets, according to UCSC professor and corresponding author Yat Li.
“This study presents a facile method to boost the capacitive performance of 3-D-printed graphene aerogel by exfoliating the stacked graphene layers and functionalizing their surface, without damaging structural integrity,” Li said.
Zhu said the findings are the next step in creating more complex architectures using aerogels, enabling more powerful supercapacitors that could someday be used in custom-built electronics.
“In the future, I think every device will be customized, so you need the unique architecture or shape (for the supercapacitor),” Zhu said. “If you can 3-D print it, you can make any shape you want. In the future, everyone could design their own iPhone.”